|
"Shelby®" Our Shelby® brand of aerosol products was introduced in 2001 to comply with the 2002 California VOC regulations. These products are also compliant with the 2005 VOC regulations adopted in the Northeastern United States. The California Air Resource Board (CARB) is currently evaluating survey data supplied by manufacturers in 2005 in preparation for new rule making which will most likely lower VOC limits again in 2007 or 2008. We are committed to keeping pace with developing California regulations with our Shelby® brand of products. |
| Shelby® Products | Common Uses | Net |
Type Bond | Color | Spray Pattern | ** Maximum Service Temp. |
** One Surface Bond @ Room Temp. |
** Two Surface Bond @ Room Temp. |
3M Product | Features | V.O.C. |
|
Shelby®
200 General Purpose Mist Spray Adhesive  |
Textile Sewing | 14 | Temporary
or Permanent |
Light Amber | Conical Mist Spray | 120ºF | 30
Seconds to 5 Minutes |
15
Seconds to 5 Minutes |
3M Industrial Adhesive | Good Coverage Economical | <65% |
| Shelby®
210 General Purpose Web Spray Adhesive  |
Foam & Fabric, Insulation, Polyfilm | 12 | Temporary
or Permanent |
Translucent | Web Spray | 130ºF | 5
Seconds to 3 Minutes |
5
Seconds to 3 Minutes |
3M74 | Soft Glue Line, Best For Uneven Surfaces, Polyfilm | <55% |
| Shelby®
275 Screen Printers Flash Cure Spray Adhesive  |
Flash Cure Textile Screen Printing | 14 | Temporary | Water White | Mist Spray | N/A | 30
Seconds to 5 Minutes |
30
Seconds to 5 Minutes |
N/A | Fast Tack Mist | <65% |
| Shelby®
277 High Performance Mist Spray Adhesive  |
Now
for arts, crafts and floral design work, Labeling, Textiles, Foam & Fabric |
13 | Temporary
or Permanent |
Water White | Fan Mist Spray | 120ºF | 7
Seconds to 5 Minutes |
7
Seconds to 5 Minutes |
3M77 | Fast Tack, Low Soak In, Remains Pressure Sensitive, Repositionable | <65% |
Shelby®
280 Mist Spray Screen Printers Adhesive |
General Purpose Textile Screen Printing | 14 | Temporary | Water White | Mist Spray | N/A | 30
Seconds to 5 Minutes |
30
Seconds to 5 Minutes |
N/A | General
Purpose, Fast Tack |
<65% |
Shelby®
290 Headliner, Trim, and Laminating Adhesive |
Automotive Trim, Marine, Furniture, Construction |
12.5 | Permanent | Water White | Adjustable Web Spray | 170ºF | N/A | 45
Seconds to 15 Minutes |
3M
8088, 3M 90, 3M Headliner, 3M80 |
Fast Tack, Hi Strength, Hi Temp, Moisture Resistant | <55% |
NOTE: Testing of adhesive on substrate(s) for compatibility is recommended before use.
**These results were obtained under controlled laboratory conditions at Camie-Campbell. Inasmuch as Camie-Campbell, Inc. has no control over the use to which others may put the material, it does not guarantee that the same results described herein will be obtained. Each user should make their own tests to determine the material's suitability for their own particular use.
SHELBY® ALL PURPOSE HEAVY DUTY CLEANER & DEGREASER |
Shelby® All Purpose Heavy Duty Cleaner & Degreaser cleans, degreases, and removes adhesives. This fast acting product has been especially formulated with a low VOC content to comply with new California air quality regulations. There is no wiping necessary with Shelby® All Purpose Heavy Duty Cleaner & Degreaser, as the product evaporates quickly while it flushes dirt, grime, grease and adhesive away. Always test any cleaner of this nature in a hidden area to determine effectiveness in your application, and to insure that the product does not harm the surface. Packed 12 cans per case.
| Shelby® Product |
Common Use | Use on Plastic or Painted Surfaces |
Odor | Comments | V.O.C. Content |
| Shelby® 2230 All Purpose Heavy Duty Cleaner & Degreaser |
Cleans, Degreases, Removes Adhesives |
Not Recommended | Mint Like | Excellent, Noncorrosive, Rapid Evaporating Heavy Duty Cleaner, Leaves No Residue |
<50% |
|
No ozone depleting chemicals are used in the formulation of Camie products. |
|
|
Camie-Campbell, Inc. 9225 Watson Industrial Park St. Louis, MO 63126 USA 800-325-9572 314-968-3222 Fax: 314-968-0741 E-mail: camie@camie.com |
Private label formulations are an extensive part of our business. We address every aspect of research and development, production, quality control, packaging and labeling to ensure regulatory compliance. Our goal is customer satisfaction. Please contact us for consultation or quotation.
All sales are strictly limited to the terms and conditions found on Camie-Campbell, Inc.'s acknowledgement, including a limited warranty and limitations on Camie-Campbell Inc.'s liabilities and buyer's remedies. All orders are subject to acceptance by Camie-Campbell, Inc. at its executive offices that are currently located at 9225 Watson Industrial Park, St. Louis, MO 63126-1581. Write, call, or e-mail for current pricing terms and conditions of sale and the name of your local distributor. Certain Camie-Campbell aerosol and bulk adhesives are not recommended for unsupported vinyl. Certain plastic and elastomeric substrates can exhibit bond failure due to plasticizer migration. Combinations of high temperature and humidity can promote bond failure. |
OTC Compliant Products!!!!