ADHESIVES

Camie 300  General Purpose Spray Adhesive

• Essentially colorless
• Instant tack
• High strength
• Temporary and permanent bonds

Camie 363  High Strength Fast Tack Spray Adhesive

• Transparent
• Web spray pattern
• Low soak-in

Camie 303  HI Performance Foam & Fabric Spray Adhesive

• Tinted orange
• Unique web spray pattern
• Low soak-in on polyurethane foam

Camie 365  Hi-Bond High Strength Spray Adhesive        NEW FORMULA

• High temperature
• Contact-type adhesive
• 1-5 Minute work time
• Unusually high initial or green strength

Camie 313  Fast Tack Upholstery Adhesive

• Develops tack (bond strength) immediately
• Soft, flexible bond
• Competitively priced

Camie 373  High Performance Adhesive

• Colorless
• Mist spray
• All purpose
• Pressure-sensitive
• Highly effective
• Low soak-in

Camie 313B**  Fast Tack Upholstery Adhesive

• Natural or red tint bulk
• Fast tack
• Strong bond on foam, fabric, wood and some metals

Camie 390B**  Contact Cement & Trim Adhesive

• Clear or red tint
• Use where high strength/high temperature bonding is required
• Bulk Only

Camie 323B**  Foam & Fabric Adhesive

• Natural or red tint -- Bulk Only
• Quick tack
• Strong bond
• Soft glue line

Camie 393  Headliner, Trim & Laminating Adhesive

• For all applications requiring high strength or high temperature
• 3-Way valve
• Web spray

Camie 343  Construction Adhesive

• Tinted blue, easy to see
• Works well on almost all substrates common to the construction industry

118 Spray Guns

• Small
• Easy to use
• Inexpensive
• Air operated
• Minimal or no maintenance or clogging due to siphon action

LUBRICANTS & MAINTENANCE

Camie 100  Heavy-Duty 6% Silicone Lubricant and Release Agent

• 6%
• Multipurpose
• High Viscosity
• For general maintenance applications

Camie 1204B  Aquasil Lubricant

• Bulk silicone lubricant and release agent dispersed in water

Camie 160  Coverall Tan Blockout Enamel

• Excellent box cover up
• Fast drying
• Waterproof
• Won't rub off when dry
• Prevents bleed through

Camie 2000  TFE Coat All Purpose Dry Film

• Forms bonded PTFE coating
• Reduces friction on most substrates
• Used where silicones or other wet lubricants cannot be used

Camie 373  High Performance Adhesive

• Colorless
• Mist spray
• For labeling, palletizing, screen printing
• Low soak in
• Remains pressure sensitive

Camie 20/15  Vinyl & Hard Surface Cleaner

• Use on all surfaces safely to remove all light soils and grime
• Foam action cleans quickly

Camie 393  Headliner, Trim & Laminating Adhesive

• Clear, nonyellowing
• For high strength or high temperature applications

Camie 20/20  Glass Cleaner

• Fast, foaming action
• Highly concentrated
• Dries without streaking or hazing

Camie 410  Food Processors Silicone Spray Lubricant

• 5%
• Dry
• Odorless
• Tasteless
• Heat stable
• Active ingredients comply with FDA Regulations
• NSF H1 Lubricant

Camie 20/25  Stainless Steel Cleaner & Polish

• Quickly cleans and polishes stainless steel in one easy application without streaking

Camie 610  Silicone Release Spray

• Most economical
• Provides release
• Prevents sticking in gluing, sealing and molding operations
• Active ingredients comply with FDA Regulations
• NSF H2

Camie 22/50*  Solvent Cleaner & Degreaser

• Nonflammable
• Jet spray valve
• Use safely on electrical components while in service

Camie 666  Heavy Duty Food Processors Silicone Grease Lubricant

• 6%
• Heavy, grease-like coating
• Clings to surfaces
• Reduces friction
• Prevents sticking
• Active ingredients comply with FDA Regulations
• NSF H1 Lubricant

Camie 22/60*  Contact Cleaner

• Good contact cleaning properties
• Quickly removes and cleans

Camie 710  Economy Food Processors Silicone Lubricant

• 3%
• Economical
• Heat stable
• For all food processors
• Active ingredients comply with FDA Regulations
• NSF H1 Lubricant

Camie 22/80  Citrus Cleaner

• Removes adhesives, grease, oil stains, road tar, rubber marks, decal residue, etc.
• Leaves no residue

Camie 888  Silicone Release Agent & Lubricant

• A 3% silicone content with a dry spray pattern
• Active ingredients comply with FDA Regulations

Camie 22/90  Heavy Duty Cleaner & Degreaser

• For heavy duty cleaning and degreasing of work areas

Camie 999  Dry Silicone

• 4% Dry
• All purpose
• Eliminates squeaking and sticking on most applications
• Active ingredients comply with FDA Regulations
• NSF H2 Lubricant

Camie 3000  4 In 1 Rust Penetrant

• All purpose
• Rust penetrant
• Moisture displacer
• Rust preventer
• Lubricant
• Cleaner

A1000  Dry Lubricant Release Agent

• Fine, dry film
• Produces slick, friction-free surface between like and unlike substrates

Camie 7272 Anti-Static Spray

• Reduces static electricity generated by friction and low humidity
• Chemically inert and colorless
• Uniform, easy application

SCREEN PRINTERS' SUPPLIES

Camie 370B  Water Based Pallet Adhesive

• Bulk
• Use brush, squeegee or roller to apply to pallet or belt printer
• Also sprayable
• 1, 5, 55 Gallon quantities

Camie 580B  Sprayout Fluid

• Extremely effective solvent blend
• Use for  spot removal in textile screen print industry

Camie 375  Screen Printers' Flash Cure Spray Adhesive

• Clear
• Mist spray
• For rapid heat cycles in the "Flash" process

Camie 999  Dry Silicone

• Applied to underside of screen
• Prevents sticking to fabric during printing process
• Active ingredients comply with FDA Regulations
• NSF H2 Lubricant

Camie 380  Screen Printers' Adhesive

• Won't wrinkle fine materials where transfer of adhesive is a problem
• Long pressure-sensitive duration

Camie 22/80  Citrus Cleaner

• Effectively removes adhesive
• Cleans pallets of old adhesive
• Leaves no residue

Camie 385  Webbing Screen Printers' Adhesive

• Specifically designed for fleece and high density garments

Camie 22/90  Heavy Duty Cleaner & Degreaser

• For heavy duty cleaning and degreasing of work areas

Camie 480  Screen Opener

• Instantly cleans plugged screens

FURNITURE, SEWING & UPHOLSTERY SUPPLIES

Camie 100  Heavy-Duty 6% Silicone Lubricant and Release Agent

• 6%
• Multipurpose
• High viscosity
• For general maintenance

Camie 610  Silicone Release Spray

• Most economical lubricant
• Prevents sticking in gluing, sealing and molding operations
• Active ingredients comply with FDA Regulations
• NSF H2

Camie 300  General Purpose Spray Adhesive

• Essentially colorless
• Instant tack
• High strength
• Temporary/permanent bonds

Camie 999  Dry Silicone

• 4%
• Driest, all purpose lubricant
• Stops squeaking and sticking in almost any application
• Active ingredients comply with FDA Regulations
• NSF H2 Lubricant

Camie 303  HI Performance Foam & Fabric Spray Adhesive

• Tinted orange
• Unique web spray
• Low soak-in on polyurethane foam

Camie 2000  TFE Coat All Purpose Dry Film

• Forms bonded, PTFE coating
• Reduces friction on most substrates

Camie 313  Fast Tack Upholstery Adhesive

• Faster open time or "Set"
• Soft bond line
• Competitively priced

Camie 22/50*  Solvent Cleaner & Degreaser

• Nonflammable
• Jet spray valve
• Use safely on electrical components while in service

Camie 363  High Strength Fast Tack Spray Adhesive

• Transparent
• Web spray
• Low soak-in
• Won't degrade polystyrene

Camie 22/60*  Contact Cleaner

• Good contact cleaning properties
• Quickly removes and cleans

Camie 365  Hi-Bond High Strength Spray Adhesive

• High temperature, high strength
• Translucent
• Web spray
• Low soak-in
• 3-Way valve

Camie 22/90  Heavy Duty Cleaner & Degreaser

• For heavy duty cleaning and degreasing of work areas

Camie 373  High Performance Adhesive

• Colorless
• Mist spray
• All purpose
• Pressure-sensitive
• Highly Effective
• Low soak-in

Camie 3000  4 In 1 Rust Penetrant

• All purpose
• Rust Penetrant
• Moisture Displacer
• Rust Preventer
• Lubricant
• Cleaner

Camie 393  Headliner, Trim & Laminating Adhesive

• Clear, nonyellowing
• For high strength/high temperature applications
• Use in decorative laminate work for furniture cabinet or woodworking

Camie 7272  Anti-Static Spray

• Reduces static electricity generated by friction and low humidity
• Chemically inert and colorless
• Uniform, easy application

PLASTIC MOLDERS' SUPPLIES

Camie 100  Heavy Duty 6% Silicone Lubricant and Release Agent

• Multipurpose
• High Viscosity
• For general maintenance

Camie 1480  All Purpose Paintable Mold Release

• Developed in response to environmental concerns over ozone depleting chemicals

Camie 610  Silicone Release Spray

• Most economical lubricant
• Prevents sticking in gluing, sealing and molding operations
• Active ingredients comply with FDA Regulations
• NSF H2

Camie 1680  Economy Silicone Mold Release Agent

• For injection, RIM, rotational molders, extruders and vacuum formers
• Active ingredients comply with FDA Regulations

Camie 666  Heavy Duty Food Processors Silicone Grease Lubricant

• 6% Silicone
• High viscosity
• For releasing extremely difficult resins
• Active ingredients comply with FDA Regulations
• NSF H1 Lubricant

Camie 1780  Economy Paintable Release Agent

• Economical
• For all thermoplastic resins/waxes where post decorating is required of parts being molded

Camie 888  Silicone Release Agent & Lubricant

• 3% Silicone
• Dry spray pattern
• Effective parting agent for most plastic resins
• Active ingredients comply with FDA Regulations

Camie 1880  Economy Lecithin Release Agent

• For all types of injection/compression molded plastics
• No buildup on mold cavities
• Active ingredients comply with FDA Regulations

Camie 980  Urethane Release Agent

• Use for rigid polyurethanes, epoxies, polyesters, TPR and other thermosetting resins

Camie 22/50*  Solvent Cleaner & Degreaser

• Jet spray valve
• Safely removes dirt from electrical components while in service
• For cold degreasing

Camie 999  Dry Silicone

• 4% Dry
• All-purpose lubricant
• Active ingredients comply with FDA Regulations
• NSF H2 Lubricant

Camie 22/80  Citrus Cleaner

• A mold cleaner
• Removes adhesives, grease and oil stains
• Leaves no residue

Camie A1000  Dry Lubricant Release Agent

• A PTFE dispersion of white, waxy, low molecular weight polymer
• For high temperature compression molding

Camie 22/90  Heavy Duty Cleaner & Degreaser

• For heavy duty cleaning and degreasing of molds

Camie 1080  Paintable Mold Release

• All purpose
• Paintable
• Universally accepted by injection, extrusion and compression molders
• Recognized under the Component Recognition program of Underwriters Laboratories, Inc.

Camie 3015  Mold Saver

• Mold saver
• Fights oxidation
• Neutralizes corrosive deposits
• Displaces moisture
• Protects molds during shutdown
• Lubricates

Camie 1380  Non-Silicone Paintable Mold Release

• Active ingredient lecithin
• Active ingredients comply with FDA Regulations

CONSTRUCTION PRODUCTS

Camie 100  Heavy-Duty 6% Silicone Lubricant and Release Agent

• For general construction maintenance
• Lubricates tools and equipment
• Prevents rust

Camie 20/25  Stainless Steel Cleaner & Polish

• Quickly cleans and polishes stainless steel in one easy application without streaking

Camie 343  Construction Adhesive

• Tinted blue, easy to see
• Works well on almost all substrates in the construction industry

Camie 22/80  Citrus Cleaner

• Effectively removes adhesives, grease, oil stains
• Cleans saw blades, tools and equipment
• Leaves no residue

Camie 365  Hi-Bond High Strength Spray Adhesive

• Offers fast grab or "green" strength
• Adjustable 3-way valve
• Web spray pattern

Camie 22/90  Heavy Duty Cleaner & Degreaser

• For heavy duty cleaning and degreasing of molds

Camie 393  Headliner, Trim & Laminating Adhesive

• Clear, nonyellowing
• For high strength/high temperature applications
• Use in decorative laminate work for furniture cabinet or woodworking

Camie 3000  4 In 1 Rust Penetrant

• Cleans, lubricates, penetrates, displaces moisture and protects

Camie A1000  Dry Lubricant Release Agent

• Reduces friction on saw blades, router bits, tables, fences and guides

Private label formulations are an extensive part of our business.  We address every aspect of research and development, production, quality control, packaging and labeling to ensure regulatory compliance.  Our goal is customer satisfaction.  Please contact us for consultation or quotation.

All sales are strictly limited to the terms and conditions found on Camie-Campbell, Inc.'s acknowledgement, including a limited warranty and limitations on Camie-Campbell Inc.'s liabilities and buyer's remedies.

All orders are subject to acceptance by Camie-Campbell, Inc. at its executive offices that are currently located at 9225 Watson Industrial Park, St. Louis, MO 63126-1581.

Write, call, or e-mail for current pricing terms and conditions of sale and the name of your local distributor.

Certain Camie-Campbell aerosol and bulk adhesives are not recommended for unsupported vinyl.  Certain plastic and elastomeric substrates can exhibit bond failure due to plasticizer migration.  Combinations of high temperature and humidity can promote bond failure.